SpecWriter Menu Reference  
 HOME SITE INDEX SpecWriter Manual Notes Menu by PowerTools Software, Inc. 
Introduction
 Table of Contents
 Executive Summary
 Program Features
 Spec Categories
 Screen Images
 Demo Manual

Manual
 Table of Contents
 Introduction
 Setup Guide
 Users Guide
 Main Manual
 Document List

Reference
 File Menu
 Checklist Menu
 Specifications Menu
 Takeoff Menu
 Estimate Menu
 Values Menu
Notes Menu
 Settings Menu
 Help Menu


Field Notes Menu
 
Field Notes Menu Commands

GENERAL DISCUSSION

These are the menu commands under the Field Notes Menu.


Field Notes Menu Commands
Menu Description
Generate Field Notes This command will use your existing Checklist to create Field Notes, which is a hand-writing friendly copy of your Checklist that is designed to be used to take notes when you are meeting with your potential customer.

The Field Notes have the exact specifications as your Checklist, but they have been reduced in font size to allow for additional room on the right side of the page for additional notes, and they have check boxes to the left of each of the specifications.

The Field Notes DO NOT include any Checklist Categories that you have collapsed with the group command.

The Field Notes also incorporate a preamble for you to write the project's name and address.

The idea behind the Field Notes is to generate them every few months to reflect the latest changes in your Checklist, print one copy and take it to a print shop and have multiple copies printed and ready for use in your office.

The Field Notes will be approximately 70 pages in length, which is why many people have them printed on both sides of the paper.

We specifically do not want you to create and print new Field Notes for each project.  That would be an unnecessary waste of your time and wear on your office printer.  In addition, you'll want them ready to go when you are on your way to meet with a customer.

Remember: The Field Notes are not generated for a specific project, you simply want to have them ready for taking notes for projects as they are needed.

The idea behind the Field Notes is to use them to take your notes while you are meeting with your client, and then when you return to your computer, you have written notes that match the Checklist on the SpecWriter screen.

In addition, it's entirely possible with the Field Notes to be able to take the written notes and then ask someone else, perhaps a member of your office staff, to use them to create the SpecWriter specifications for the project.  Because the Field Notes match the SpecWriter Checklist, this person has a fighting chance of actually getting the specification properly written, although you will need to review them carefully yourself before final release.

There are SpecWriter users who, by using the Field Notes, never actually touch the computer themselves.

After you have finished generating Field Notes, SpecWriter will prompt you to save the file with the Field Notes as Field Notes.xls.

We strongly recommend you save the file as Field Notes, this will allow you to open the File Notes file again as needed to re-print the Field Notes.

Because generating the Field Notes will add approximately 400k to the size of you SpecWriter Master File, we DEFINATLY do not recommend that you save the file as SpecWriter Master File or that you have the Field Notes generated in your SpecWriter Master File.

The process is easy:
  1. When you need new Field Notes, open your SpecWriter Master File, generate the Field Notes, and then save the file as Field Notes.xls.
  2. If you need to re-print the Field notes, open the Field Notes.xls file and select Notes | Print Field Notes.
  3. When you want to generate new Field Notes to include your latest changes to your Checklist specifications, repeat the above process and save the new Field Notes.xls file over the old Field Notes.xls file.

Preview Field Notes This command will open the Print Preview function, which will present the Field Notes on the screen exactly as they will be printed.

In the Preview mode you can use the menu bar at the top of the page to move between the pages and to zoom in on any portion of a page for a closer view.

You can also use the Margins menu to change the page margins, by we strongly suggest that you leave our default settings as they are.

Use the Close menu button to close the Print Preview function when you are finished reviewing the Specifications.

It's always a good idea to preview the Field Notes before printing them.

Print Field Notes This command will print the entire Field Notes on your default printer.

If you need to send the print job to another printer, or if you only want to print a page or specific pages of the Field Notes, then you should use File | Print Dialog Box instead.

Top of Page               


Copyright ©1997-2007 by PowerTools Software, Inc.  All Rights Reserved

Legal Notices | Copyright | Terms of Use | Privacy Statement